BaganTrack
Online Customer Interface

BAGAN Richard J. Bagan, Inc.
red line

Rubber Testing Equipment Services
Calibration, Mainentance, Parts, Software, and Upgrades for Curemeters, Rheometers & Viscometers

 

Upgrades & Rebuilds
Select a model from the list below to view details.

Monsanto R-100 Rheometer

Monsanto R-100 Rheometer Upgrade

Bagan's R-100 rheometer upgrade package applies modern technology to the Monsanto R-100, which was discontinued years ago but it continues to perform as the standard curemeter for rubber manufacturers around the world.

For the fraction of the cost of buying a new ODR rheometer, your trusted R-100 can continue to be the workhorse of your rubber testing lab for many more years.

Bagan's R-100 upgrade package is a complete rebuild with every part disassembled, cleaned, inspected, and refurbished or replaced. The case and mechanical / pneumatic parts are restored to like-new condition or replaced when needed, the electrical system is rewired with new cabling and modern digital components, and the obsolete unsupported operating system is replaced by a new computer running MonContol on Windows 8.

The Monsanto R-100 Upgrade Includes:

  • New compact-case computer and wide-screen monitor
  • Windows 8 to replace the unsupported legacy operating system
  • MonContol software for machine operation, data collection, and reporting
  • USB conversion – R-100 converted to a USB device allowing a single digital connector to replace the separate serial ports used for temperature and torque data collection
  • Rebuilt main compression cylinder
  • Rebuilt clamping cylinder
  • Proximity switch upgrade to optical
  • New PID temperature controllers with computer communication
  • New electronics package including:

    • PLC
    • DAQ card
    • Signal conditioner
    • Power supply
  • New door and pushbutton controls
  • Electrical system wiring completely replaced
  • Cabinet sandblasted and repainted inside & out
  • 48-hour burn in testing to ensure quality components and workmanship
  • On-site installation & training

Monsanto M-1500 Mooney Viscometer

Monsanto M-1500 Mooney Viscometer Upgrade

Bagan's M-1500 Mooney Viscometer upgrade package applies modern technology to the Monsanto M-1500, which was discontinued years ago but it continues to perform as the standard viscometer for rubber manufacturers around the world.

For the fraction of the cost of buying a new mooney viscometer, your trusted M-1500 can continue to be the workhorse of your rubber testing lab for many more years.

Bagan's M-1500 upgrade package is a complete rebuild with every part disassembled, cleaned, inspected, and refurbished or replaced. The case and mechanical / pneumatic parts are restored to like-new condition or replaced when needed, the electrical system is rewired with new cabling and modern digital components, and the obsolete unsupported operating system is replaced by a new computer running MonContol on Windows 8.

The Monsanto M-1500 Upgrade Includes:

  • New compact-case computer and wide-screen monitor
  • Windows 8 to replace the unsupported legacy operating system
  • MonContol software for machine operation, data collection, and reporting
  • USB conversion – M-1500 converted to a USB device allowing a single digital connector to replace the separate serial ports used for temperature and torque data collection
  • Rebuilt main compression cylinder
  • New PID temperature controllers with computer communication
  • New electronics package including:

    • PLC
    • DAQ card
    • Signal conditioner
    • Power supply
  • New door and pushbutton controls
  • Electrical system wiring completely replaced
  • Cabinet sandblasted and repainted inside & out
  • 48-hour burn in testing to ensure quality components and workmanship
  • On-site installation & training

TechPRO RheoTECH MD

TechPro RheoTech Moving Die (MD) Rheometer Upgrade

Bagan's TechPro Rheotech MD upgrade package applies modern technology to the TechPro moving die (MD) rheometer.

For the fraction of the cost of buying a new oscillating disk rheometer, your RheoTech MD can continue to be the workhorse of your rubber testing lab for many more years.

Bagan's RheoTech MD upgrade package is a complete rebuild with every part disassembled, cleaned, inspected, and refurbished or replaced. The case and mechanical / pneumatic parts are restored to like-new condition or replaced when needed, the electrical system is rewired with new cabling and modern digital components, and the obsolete unsupported operating system is replaced by a new computer running MonContol on Windows 8.

The TechPro RheoTech MD Upgrade Includes:

  • New compact-case computer and wide-screen monitor
  • Windows 8 to replace the unsupported legacy operating system
  • MonContol software for machine operation, data collection, and reporting
  • USB conversion – Rheometer converted to a USB device allowing a single digital connector to replace the separate serial ports used for temperature and torque data collection
  • Rebuilt main compression cylinder
  • Rebuilt clamping cylinder
  • Proximity switch upgrade to optical
  • New PID temperature controllers with computer communication
  • New electronics package including:

    • PLC
    • DAQ card
    • Signal conditioner
    • Power supply
  • New door and pushbutton controls
  • Electrical system wiring completely replaced
  • Cabinet sandblasted and repainted inside & out
  • 48-hour burn in testing to ensure quality components and workmanship
  • On-site installation & training

TechPRO RheoTECH OD

TechPro RheoTech Oscillating Disk Rheometer (ODR) Upgrade

Bagan's TechPro ODR upgrade package applies modern technology to the TechPro oscillating disk rheometer (ODR).

For the fraction of the cost of buying a new oscillating disk rheometer, your TechPro ODR can continue to be the workhorse of your rubber testing lab for many more years.

Bagan's TechPro ODR upgrade package is a complete rebuild with every part disassembled, cleaned, inspected, and refurbished or replaced. The case and mechanical / pneumatic parts are restored to like-new condition or replaced when needed, the electrical system is rewired with new cabling and modern digital components, and the obsolete unsupported operating system is replaced by a new computer runningMonContol on Windows 8.

The TechPro RheoTech ODR Upgrade Includes:

  • New compact-case computer and wide-screen monitor
  • Windows 8 to replace the unsupported legacy operating system
  • MonContol software for machine operation, data collection, and reporting
  • USB conversion – Rheometer converted to a USB device allowing a single digital connector to replace the separate serial ports used for temperature and torque data collection
  • Rebuilt main compression cylinder
  • Rebuilt clamping cylinder
  • Proximity switch upgrade to optical
  • New PID temperature controllers with computer communication
  • New electronics package including:

    • PLC
    • DAQ card
    • Signal conditioner
    • Power supply
  • New door and pushbutton controls
  • Electrical system wiring completely replaced
  • Cabinet sandblasted and repainted inside & out
  • 48-hour burn in testing to ensure quality components and workmanship
  • On-site installation & training

TechPRO ViscTECH

TechPro ViscTech Mooney Viscometer Upgrade

Bagan's ViscTech mooney viscometer upgrade package applies modern technology to the TechPro mooney viscometer.

For the fraction of the cost of buying a new mooney viscometer, your TechPro ViscTech can continue to be the workhorse of your rubber testing lab for many more years.

Bagan's TechPro ViscTech upgrade package is a complete rebuild with every part disassembled, cleaned, inspected, and refurbished or replaced. The case and mechanical / pneumatic parts are restored to like-new condition or replaced when needed, the electrical system is rewired with new cabling and modern digital components, and the obsolete unsupported operating system is replaced by a new computer running MonContol on Windows 8.

The TechPro ViscTech Upgrade Includes:

  • New compact-case computer and wide-screen monitor
  • Windows 8 to replace the unsupported legacy operating system
  • MonContol software for machine operation, data collection, and reporting
  • USB conversion – Mooney viscometer converted to a USB device allowing a single digital connector to replace the separate serial ports used for temperature and torque data collection
  • Rebuilt main compression cylinder
  • New PID temperature controllers with computer communication
  • New electronics package including:

    • PLC
    • DAQ card
    • Signal conditioner
    • Power supply
  • New door and pushbutton controls
  • Electrical system wiring completely replaced
  • Cabinet sandblasted and repainted inside & out
  • 48-hour burn in testing to ensure quality components and workmanship
  • On-site installation & training


Richard J Bagan Inc. is in no way affiliated with any of the original equipment manufacturers (OEMs) listed above. We specialize in sales, remanufacture, PM service, replacement parts and accredited calibration of rubber testing equipment. All OEM trade names, copyrights, company names, and trademarks on this page are the property of their respective owners.
line
A2LA Accredited
A2LA Accredited Calibration
In-Lab / On-Site
ISO/IEC 17025:2005
ANSI/NCSL Z540-1-1994
Certificate 1625.01
ABS Quality Evaluations
ISO 9001:2008 Certified
• Calibration Management
• Repairable Asset Management
• Preventive Maintenance Management
Certificate 34299

NCSL International
NCSLI Member

National Conference of Standards Laboratories International

Calibration / Repair Depot
Headquarters

1280 S. Williams Dr.
Columbia City, IN 46725-0169

Phone: 800.552.5115
Fax: 260.244.4158
mail@rjbagan.com

Fort Wayne Calibration
Sales Office

7231 Engle Road, Suite 500
Fort Wayne, IN 46804

Phone: 800.552.5115
Fax: 260.244.4158
mail@rjbagan.com